Fast, Reliable HVAC Cleaning Across Keller
HVAC cleaning in Keller typically runs $280-$650 for a complete system clean, depending on your home’s size, duct footage, and how many units we’re servicing. Most Keller jobs take 3-5 hours and are finished in a single visit. Call (844) 685-6342 for a free estimate with upfront pricing - the number we quote is the number on the invoice.
We’ve been driving out to Keller from our dispatch routes for over four decades, and we know the territory well. From the master-planned communities off Golden Triangle Boulevard to the established neighborhoods near Keller Smithfield Road, our technicians arrive with equipment sized for the large homes that define this market. We’re familiar with the dual-zone systems, the long flex duct runs through hot attics, and the cedar pollen loads that Keller’s particular geography delivers. When you call, a live person answers - 24 hours a day, every day - and we’ll give you a real arrival window, not a four-hour guess.
Why Bellows Air Duct & Vent Co. Is Keller’s Preferred HVAC Cleaning Company
Bellows Air Duct & Vent Co. has built its reputation in North Texas on showing up when we say and standing behind the work. Our HVAC Cleaning team serves Keller with the same standard we’ve held since 1984: camera-verified results, upfront pricing, and our 90-Day Done Right Promise in writing. If something isn’t right, we make it right - no paperwork, no arguing.
Keller homeowners tend to stay put. They’ve raised families in these 3,000-square-foot homes, watched the trees mature, and they’re not interested in a quick-fix contractor who disappears. They want the job done thoroughly so it doesn’t need doing again next year. That’s exactly who we built this company for.
Our response time to Keller is typically same-day or next-day, depending on call volume. We don’t subcontract. Every technician is background-checked, uniformed, and arrives in a marked Bellows van with professional-grade equipment from Rotobrush and Abatement Technologies. Before we touch a tool, we run a camera through your ductwork. After we finish, we run it again. You see what we see.
Ray Castillo, who leads Bellows, set the policy early: no bait coupons, no scare tactics, no price changes at the door. The quote you get over the phone holds. We’ve served this region for over 42 years, and that only happens when customers call you back - or send their neighbors.
Our HVAC Cleaning Services in Keller
Evaporator Coil Cleaning
The evaporator coil sits in your air handler, and in Keller it works harder than in most Texas cities. North Texas runs cooling six-plus months a year, and Keller’s native Ashe juniper - mountain cedar - releases extremely fine pollen from December through February that slips past standard filters and cakes onto coil fins. A dirty coil can’t transfer heat efficiently. Your system runs longer, your bills climb, and the compressor takes the strain. We use foaming cleaners and low-pressure rinses that clear the debris without bending the fins. For Keller homes with dual-zone systems, we clean both coils and document the before-and-after with our camera inspection.

Blower Cleaning
The blower motor and wheel move every cubic foot of air through your home. When dust and pollen build up on the blades, airflow drops and the motor draws more amperage. In Keller’s large homes with 2,000-plus feet of flex duct, the blower already works harder than standard residential units. We remove the blower assembly, clean the wheel and housing, and check the motor amp draw against manufacturer specs. It’s detailed work that takes time, but a clean blower is what makes the difference between air that moves and air that trickles from your vents.

Condenser Cleaning
Your outdoor condenser coil rejects the heat your system pulls from inside. Cottonwood from nearby greenbelts, grass clippings, and plain North Texas dust pack between the fins. We fin-comb the coil straight, then apply foaming cleaner and rinse from the inside out so debris exits rather than driving deeper. For Keller homes with units tucked against fences or in side yards with limited clearance, we take the time to pull panels and do it properly - not a quick spray from the outside that leaves half the debris in place.

Air Handler Cleaning
The air handler is the central station: blower, coil, drain pan, and filter rack. In Keller’s master-planned homes from the late 1990s through mid-2000s, these units often sit in attic spaces that hit 150°F in July. That heat degrades surrounding flex duct, but it also accelerates microbial growth in the drain pan and on the coil. We clean the full cabinet, treat the drain line to prevent clogs, and inspect the filter rack for gaps that let unfiltered air bypass. A clean air handler is the foundation of a clean system - everything downstream depends on it.
We also provide Heat Exchanger Cleaning and Coil Treatment services for Keller homeowners with specific system configurations or indoor air quality concerns.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We carry professional-grade equipment and supplies from Rotobrush, Abatement Technologies, and Aprilaire - the same brands that serious HVAC contractors specify for their own jobs. For Keller customers, this means we don’t need to special-order parts or reschedule because something’s out of stock. Our vans are inventoried for the coil cleaners, foaming agents, and agitation tools these systems require. Most jobs finish in one visit because we showed up prepared for the actual conditions we find in 76244 and 76248.
Common HVAC Cleaning Problems We See in Keller Homes
- Builder-grade flex duct collapse in 150°F attics. In Keller’s older master-planned subdivisions, particularly homes built during the early-2000s growth surge, second-floor flex duct runs have partially collapsed or pulled loose at boot connections after years of attic heat exposure. Cleaning alone won’t restore airflow - we need to re-seat and seal the duct before the cleaning can begin.
- Mountain cedar pollen loading coils and ducts faster than prairie suburbs. Keller sits at the eastern edge of the Cross Timbers zone where Ashe juniper is native. The December-through-February pollen season sends particles fine enough to pass standard filters straight into return-air intakes, requiring more frequent coil and duct maintenance than homes in eastern Tarrant County.
- Mismatched maintenance histories on dual-zone systems. Many Keller homes have two or three HVAC units, and homeowners often service only the one that’s acting up. This creates uneven wear, inconsistent air quality between floors, and surprises when the neglected unit fails during a July heat wave. We check every unit and report honestly on what each needs.
- Dense construction dust accumulation in 20-year-old systems. Homes built during Keller’s residential explosion from 1995 through 2010 have never had their original flex duct cleaned in many cases. The accumulated debris - drywall dust, insulation fragments, pollen, and ordinary household dust - can be substantial, extending cleaning time but delivering dramatic airflow improvement.
We recently serviced a 4,200 sq ft home in the Park Glen subdivision (ZIP 76248), built in 2002 with two HVAC units. Upon inspection, we found the second-floor flex duct had partially collapsed and disconnected at the boot junction due to attic heat, requiring re-seating and sealing before cleaning could proceed. Using our Rotobrush system, we removed dense construction dust and cedar pollen debris that had accumulated over 22 years.
Pricing for HVAC Cleaning in Keller, TX
Keller’s master-planned subdivisions from the late 1990s to mid-2000s typically feature large two-story homes with dual-zone HVAC systems and builder-grade flex duct runs exceeding 2,000 feet total, making cleaning jobs consistently more time-consuming than in nearby cities with newer or smaller homes. We price accordingly, and we show you the breakdown before we start.
| Service | Typical Range in Keller |
|---|---|
| Single-zone air handler & coil cleaning | $280-$420 |
| Dual-zone complete system cleaning | $480-$650 |
| Evaporator coil cleaning (per coil) | $180-$280 |
| Blower assembly removal & cleaning | $150-$220 |
| Condenser coil cleaning | $120-$180 |
| Duct repair/re-seating (when needed) | $200-$450 additional |
Factors that move the price: total duct footage, number of HVAC units, accessibility of attic runs, and whether we find collapsed or disconnected duct that needs repair before cleaning. We don’t bait with a low number and add charges at the door. The quote we give you - after asking the right questions about your home - is the price you pay. Seniors and veterans receive a permanent 5% discount. Call (844) 685-6342 for your free estimate.
We Also Serve Cities Near Keller
Our technicians regularly work in Keller and the surrounding communities, including Watauga, North Richland Hills, Southlake, and Trophy Club. The same large-home, dual-zone conditions we know in Keller extend into parts of Southlake and Trophy Club, while Watauga and North Richland Hills present their own mix of housing ages and system types. Wherever you are in this pocket of northeast Tarrant County, we bring the same equipment, the same camera verification, and the same upfront pricing.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Keller
Every 3-5 years for most Keller homes, and every 2-3 years if anyone in your household has allergies or asthma. The Ashe juniper pollen that blows through from December to February is finer than many filters catch, and it accumulates in ductwork alongside ordinary dust. Call (844) 685-6342 and we’ll assess your specific system and usage.
Sometimes, but not always. Poor second-floor airflow in Keller’s older master-planned homes often traces to flex duct that has collapsed or pulled loose in a hot attic - a mechanical failure that cleaning alone cannot repair. We camera-inspect first. If we find collapsed duct, we’ll show you and quote the re-seating work before we proceed with cleaning. Call (844) 685-6342 for an inspection.
Yes, and we recommend it. Cleaning only one unit in a dual-zone Keller home creates mismatched airflow and air quality between floors, and the neglected unit often fails next. We price dual-zone cleaning as a package and complete both units in the same visit. Call (844) 685-6342 for a quote on your specific system.
Our complete HVAC cleaning includes the evaporator coil, but many companies quote “duct cleaning” that covers only the duct runs and skips the coil. The coil is where the real debris collects in Keller’s climate. Ask specifically what’s included when you compare quotes, or call (844) 685-6342 and we’ll detail our full scope.
Not necessarily, but you should have them inspected. Flex duct has a 20-25 year lifespan, and Keller’s 2005-era homes are entering that window. The combination of attic heat and original builder-grade material means some runs are degrading. We camera-inspect before every cleaning and will show you the actual condition of your ductwork. If replacement makes sense, we’ll say so. If cleaning and sealing will extend its life, we’ll say that too. Call (844) 685-6342 for an honest assessment.
Ready to schedule your HVAC cleaning in Keller? Call Bellows Air Duct & Vent Co. at (844) 685-6342 for a free estimate with upfront pricing. We’ll answer your questions, give you a real arrival window, and show up prepared for the specific conditions in your home. Our 90-Day Done Right Promise means if it’s not right, we make it right - no paperwork, no arguing.
Written by Ray Castillo, Owner at Bellows Air Duct & Vent Co., serving Keller and North Texas since 1984.