Fast, Reliable Dryer Vent Cleaning Across Hurst
Dryer vent cleaning in Hurst typically runs $149-$289 for a standard single-story ranch, with most jobs finished in under two hours and same-day scheduling available when you call before noon. We’re familiar with the HEB corridor’s postwar housing stock, and our Dryer Vent Cleaning crew makes the short run from our dispatch to Hurst’s 76053 and 76054 ZIP codes daily. If your dryer’s taking two cycles to finish a load, or you’re smelling something hot behind the laundry door, that’s not normal, and it’s not something to wait on. Call (844) 685-6342 and we’ll give you an honest price before we head your way.
Why Bellows Air Duct & Vent Co. Is Hurst’s Preferred Dryer Vent Cleaning Company
We’ve been serving North Texas homeowners since 1984, and Hurst’s slab-ranch neighborhoods have been part of our route for decades. Our customers here tend to be the kind of people who’ve owned the same house for twenty or thirty years, and they don’t call us twice for the same problem. The 90-Day Done Right Promise means if something’s not right, we come back, no paperwork, no arguing.
Our technicians are background-checked and uniformed, and they answer to a live person at our office, 24 hours a day. That matters in Hurst, where many of our calls come from folks who’ve already had a bad experience with a coupon operator who showed up with a shop vac and a clipboard full of upsells. We don’t work that way. One price, shown before we start. Camera inspection before and after, so you see what we see.
Most Hurst appointments are completed in a single visit. We carry the parts and equipment to handle collapsed flex, failed connections, and original vent caps that should have been replaced decades ago.
Our Dryer Vent Cleaning Services in Hurst
Dryer Vent Inspection
Every job starts with a camera inspection. In Hurst’s 1955-1975 slab-ranch homes, original galvanized trunk lines are often mated to flex branches with dried-out 1960s foil tape, leading to collapsed sections that trap lint and restrict airflow - a condition far rarer in nearby Colleyville’s newer builds. We document what we find, show you the footage, and explain exactly what needs attention before any work begins.
Vent Cleaning & Lint Removal
We use professional-grade equipment from Nikro and Abatement Technologies to remove built-up lint from the full length of your vent run, including the hidden sections behind walls and in attics. Hurst’s combination of aged materials and extreme North Texas attic heat accelerates liner breakdown and debris accumulation at a rate measurably worse than in newer suburbs. On a cool December morning off Pipeline Road in the 76053 ZIP, our crew tackled a dryer vent on a 1964 brick ranch where the homeowner reported a tripped heat sensor. We found a 1970s flex run partially collapsed at a splice, packed with lint from three decades of uncapped Juniper pollen - a dry fire waiting to happen. We replaced the sagging flex, sealed all connections with spiral duct and high-temp mastic, and installed a Guardsman bird guard on the roof cap; the run now pulls a 0.2-inch static pressure drop, well under the 0.5 max.
Vent Rerouting
On sprawling Hurst properties, dryer vents snake through detached workshops with heavy-duty doors, where long, unsupported flex runs sag and trap lint behind oversized springs and openers. We reroute these runs with proper support, shorter spans, and rigid or semi-rigid duct where code allows. In Hurst’s larger garages, vents are often routed behind heavy overhead door tracks, inaccessible without partial disassembly - leading to incomplete cleaning if technicians skip the hardware. We don’t skip it. We disassemble, clean, and reassemble properly.
Bird Guard Installation & Vent Cap Replacement
Self-reliant Hurst homeowners frequently attempt DIY cleaning but miss hidden collapsed sections in the 50-year-old galvanized-to-flex transitions, leaving debris pockets behind. We finish what they started, and we protect against recurrence. Bird guard installation keeps nesting material out of your vent, and vent cap replacement restores proper backdraft prevention and weather sealing. If your cap’s original from 1970, it’s not doing its job anymore.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We stock parts and use equipment from Honeywell, Aprilaire, and Nikro - the same brands serious HVAC contractors specify for their own jobs. For Hurst customers, that means faster turnaround and fewer return trips. We don’t have to order a specialty cap or a replacement bird guard and make you wait a week. Our trucks carry the common sizes and configurations found in HEB-era homes, and if your setup’s unusual, we’ll tell you upfront what we need to source and when we can have it.
Common Dryer Vent Cleaning Problems We See in Hurst Homes
- Collapsed flex at galvanized transitions. In Hurst’s HEB-era slab ranches, the original galvanized trunk lines are often still mated to flex branch runs using dried-out foil tape or cracked mastic from the 1960s and 70s; experienced technicians working these neighborhoods routinely discover partially disconnected or fully collapsed flex sections during cleaning.
- Long unsupported runs to detached workshops. On sprawling acreage properties, vents snake through outbuildings with heavy-duty doors and openers, where flex sags and traps lint in sections a standard cleaning brush never reaches.
- Vents routed behind heavy door hardware. In Hurst’s larger garages, the vent path runs behind overhead door tracks that must be partially disassembled for proper access - a step discount cleaners often skip.
- Original vent caps failed decades ago. The 1970s caps still common in 76053 and 76054 have no bird screening, cracked flappers, and degraded seals that let in weather, pollen, and pests from nearby greenbelts.
Pricing for Dryer Vent Cleaning in Hurst, TX
| Service | Typical Range in Hurst |
|---|---|
| Standard single-story vent cleaning | $149-$189 |
| Two-story or extended run | $189-$249 |
| Vent rerouting (per run) | $249-$389 |
| Bird guard installation | $89-$149 |
| Vent cap replacement | $129-$199 |
| Collapsed flex repair/replacement | $199-$289 |
What drives cost up or down: the length and accessibility of your vent run, whether we find collapsed sections requiring repair, and whether your cap or bird guard needs replacement. We give you the full price before we start, and that’s the price on the invoice. No bait coupons, no changes at the door. Ask about our $89 Seasonal Tune-Up if you’re scheduling regular maintenance, or the permanent 5% Senior and Veteran discount.
We Also Serve Cities Near Hurst
Our Dryer Vent Cleaning in Hurst crew covers the full HEB corridor, including Bedford, North Richland Hills, Colleyville, and Watauga. If you’re on the edge of Hurst near the border with one of these cities, we still know your neighborhood’s housing stock and we’re still close enough for same-day service most days.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Hurst
Yes. We inspect galvanized-to-flex transitions with a camera first, because the original foil tape and mastic have usually dried out and cracked. We hand-brush the rigid sections to avoid damaging aged metal, then replace collapsed flex with new semi-rigid duct sealed with high-temp mastic. Call (844) 685-6342 for a free estimate - we’ll show you exactly what we’re working with before any work begins.
Yes, and we’re equipped for it. We disassemble door hardware as needed to access the full vent run, then reassemble properly. Our trucks carry the tools and parts to handle heavy-duty openers and tracks without damaging your door system. Call (844) 685-6342 to schedule - most workshop vent jobs are completed in one visit.
Hurst’s housing stock is 50-plus years old, with original fiberglass-lined sheet metal or early flex duct baking in attics that routinely exceed 150°F in July. That combination of aged materials and extreme heat accelerates liner breakdown and debris accumulation at a rate measurably worse than in Colleyville or North Richland Hills, where development began in the 1990s with modern materials and better attic insulation. The region’s heavy pollen loads don’t help. Call (844) 685-6342 if your dryer’s running slow - we’ll diagnose whether age or environment is the bigger factor.
Yes, we install Guardsman bird guards as a standard add-on during cap replacement or cleaning. Greenbelt properties near the Trinity River corridor see more bird and squirrel activity, and an unscreened cap is an open invitation. The guard adds $89-$149 depending on cap type and roof access. Call (844) 685-6342 and we’ll include it in your upfront quote.
Yes, almost certainly. Original caps from Hurst’s buildout era have no bird screening, cracked or missing flappers, and degraded seals that let in weather and pests. Replacement runs $129-$199 including installation, and we stock the common sizes for HEB-era homes. Call (844) 685-6342 - we’ll inspect it with our camera and show you the condition before you decide.
Written by Ray Castillo, Owner at Bellows Air Duct & Vent Co., serving Hurst since 1984.