Fast, Reliable Dryer Vent Cleaning Across Irving
Dryer vent cleaning in Irving typically runs $149-$289 for standard residential jobs, with most completed in a single visit. If you’re dealing with a long vent run to a detached garage or workshop, expect $250-$450 depending on access and whether rerouting is needed. Call (844) 685-6342 and we’ll give you an exact number before we drive out.
We’ve been sending our Dryer Vent Cleaning crews to Irving since the mid-1980s, back when Las Colinas was still mostly ranch land and south Irving’s slab-on-grade ranches were the newest thing going. We know the difference between a 15-foot vent through an interior wall in Valley Ranch and a 60-foot run across a property off W Rochelle Rd. That local knowledge matters because the wrong approach to a long vent run just means you’ll be calling someone again in two years. We don’t work that way. Our technicians are background-checked, uniformed, and carry the equipment to handle both standard cleans and full reroutes in one trip.
Why Bellows Air Duct & Vent Co. Is Irving’s Preferred Dryer Vent Cleaning Company
Bellows Air Duct & Vent Co. has been serving the Irving area for over 42 years. We’re not a dispatch service routing calls to whoever’s available. Our office answers live, 24 hours a day, and our technicians know Irving’s housing stock because they’ve worked it for decades.
Our reputation here is built on not needing to come back. The 90-Day Done Right Promise is stamped on every job: if it’s not right, we make it right with no paperwork and no arguing. That’s not marketing language. It’s how Ray Castillo has run this company since 1984.
We answer calls from Irving homeowners at all hours, and we schedule with specific arrival windows, not all-day waits. Most standard dryer vent cleans in Irving are completed in under two hours. Long vent runs and reroutes take longer, but we quote the full scope upfront so you know the number before a tool is lifted.
Irving customers tell us they chose Bellows because the last company gave a low phone price, then added charges for “extra feet” of duct at the door. We don’t operate that way. One honest price, shown before we start.
Our Dryer Vent Cleaning Services in Irving
Dryer Vent Inspection
Every job starts with a camera inspection. We run a borescope through the full vent path and show you what we’re seeing. In Irving’s older homes, especially south of SH-183 in the 75060-75062 ZIP codes, we regularly find crushed flex duct, disconnected joints from foundation settling, and bird nests in caps that lost their flaps years ago. The inspection takes 15-20 minutes and gives us both a clear picture of what needs doing.
Vent Cleaning and Lint Removal
We clean with professional-grade equipment from Rotobrush and Nikro, using brushes sized to your duct diameter and high-velocity vacuums that capture lint at the source. Standard residential vents in Irving’s single-family homes typically yield 3-8 pounds of compacted lint. Long runs to detached structures can hold significantly more. We clean the full run from dryer connection to exterior cap, including the transition duct behind your machine.
Vent Rerouting
This is where our Irving experience pays off. Many acreage properties in the 75060-75062 corridor have dryer vents originally routed through uninsulated crawlspaces, attics, or underground to reach detached garages and workshops. These paths sag, collapse, or trap condensation. We reroute with 4-inch smooth-wall rigid duct, properly supported and insulated where needed, to create a straight or gently sloped path that maintains airflow and meets current IRC standards. A proper reroute can cut drying time by 30% or more and eliminate the fire hazard of a blocked or collapsed run.
Bird Guard Installation and Vent Cap Replacement
DFW’s green spaces attract woodpeckers, sparrows, and starlings that peck through plastic vent flaps and build nests in the housing. We install Guardsman vent hoods with built-in bird guards and replace corroded caps damaged by irrigation overspray on large lots. The bird guard is a simple metal mesh that stops nesting without restricting airflow. For properties near Trinity River greenbelt or the Campion Trail corridor, we recommend this on every replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We carry and install vent caps and components from Guardsman, Rotobrush, and Nikro. These are the same brands serious HVAC contractors specify, not the thin-gauge hardware store stock that fails in two seasons. For Irving’s acreage properties with longer vent runs and harsher exposure, we specify heavier-duty caps with metal flaps and integrated bird guards. We keep common sizes in stock, so most replacements happen same-day without waiting on parts.
Common Dryer Vent Cleaning Problems We See in Irving Homes
- Crushed flex duct in long runs to detached structures. On acreage properties with 50+ foot vent paths, flexible aluminum duct sags between supports, collects lint at low points, and eventually collapses from its own weight after years of heat cycling. We replace these with rigid duct on proper supports.
- Bird guard failure from local species. Woodpeckers in the DFW area peck through plastic vent flaps, and sparrows build nests in the housing. Once a nest blocks the vent, lint backs up into the dryer cabinet. We install metal bird guards that stop this without creating a new restriction.
- Vent cap corrosion from irrigation exposure. Large lots in Irving often have sprinkler heads that spray directly on exterior walls. Galvanized and painted steel caps rust through in 3-5 years. We specify stainless or powder-coated aluminum replacements for these locations.
- Foundation-shifted boots in south Irving’s clay soil. The black clay expands and contracts with every rain cycle, shifting slab foundations and pulling vent connections loose in crawlspaces. We find separated joints that dump lint and moisture into the structure.
Pricing for Dryer Vent Cleaning in Irving, TX
Here’s what dryer vent cleaning costs in Irving’s market:
| Service | Typical Range |
|---|---|
| Standard residential vent cleaning (single-story, under 25 feet) | $149-$189 |
| Two-story or extended run (25-40 feet) | $189-$249 |
| Long run to detached structure (40-70 feet) | $250-$350 |
| Full vent rerouting with rigid duct replacement | $350-$450 |
| Vent cap replacement with bird guard | $85-$145 |
| Camera inspection only | $89 |
These are the numbers we quote before work begins. No bait coupons, no add-ons at the door. Senior and veteran customers receive a permanent 5% discount. We also offer a $89 Seasonal Tune-Up that includes vent inspection and light cleaning. Call (844) 685-6342 for an exact quote on your specific setup. Estimates are free.
We Also Serve Cities Near Irving
Our crews work throughout the DFW Metroplex, including Dryer Vent Cleaning in Irving and surrounding communities. We regularly serve Farmers Branch to the north, University Park and Highland Park to the east, and Dallas proper. Response times to these areas are similar to Irving, and we apply the same upfront pricing and 90-Day Done Right Promise on every job.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Irving
Longer vent runs to detached garages and workshops create more friction, more lint accumulation points, and more opportunities for sagging or collapse. A 60-foot run through an uninsulated crawlspace experiences temperature swings that fatigue flexible duct. We address this with rigid duct rerouting and proper support spacing. Call (844) 685-6342 for a free inspection of your vent path.
Yes, if your property is near green space or has had bird activity before. DFW woodpeckers peck through plastic flaps, and sparrows nest in vent housings year-round. A bird guard adds $25-$40 to a cap replacement and prevents blockages that can cause dryer overheating. We install them as standard on all Guardsman caps we sell.
The expansive clay shifts slab foundations, which can pull vent connections loose in crawlspaces and create separated joints that leak lint and moisture. We inspect for this on every south Irving job and repair separations as part of the cleaning. This is a failure mode we rarely see in newer markets with stable soils.
Yes, and we do this regularly on Irving’s 1960s-1970s ranch homes. The original under-slab or buried flex duct is usually collapsed or blocked. We abandon that path and run new rigid duct through the attic or along the foundation exterior, properly sloped and supported. Most reroutes take 3-4 hours and are completed in one visit.
We specify Guardsman vent hoods with metal construction and integrated bird guards for Irving’s exposed locations. These outperform plastic caps in UV exposure, impact from mowing equipment on large lots, and resistance to woodpecker damage. We stock common sizes and colors for same-day installation.
Ready to get your dryer vent cleaned right? Call Bellows Air Duct & Vent Co. at (844) 685-6342 for a free estimate. We’ll ask about your vent length, whether it’s to a detached structure, and any bird or moisture issues you’ve noticed. Then we’ll give you an exact price and schedule a time that works. Most jobs are done in one visit, and everything we do is backed by our 90-Day Done Right Promise in writing.
Written by Ray Castillo, Owner at Bellows Air Duct & Vent Co., serving Irving and the DFW Metroplex since 1984.